Concrete & Masonry Screws
Blue Ceramic Hex Washer Head Concrete Screw
3/16" and 1/4" hex washer head masonry screws with blue ceramic coating and Hi-Lo thread.
3/16"Carbon steel
Concrete & Masonry Screws
Concrete screws cut their own thread in a pre-drilled hole in concrete, brick or block, so no plug or anchor is needed and the fixing can be removed. A hardened high-low or serrated thread keeps installation torque low and holding power high.
Concrete & Masonry Screws
Flat Head Masonry Screw
Phillips countersunk concrete screw in blue, white or black coating for flush fixing into masonry.
3/16"Hardened carbon steel
Concrete & Masonry Screws
High-Low Thread Concrete Screw, Ceramic Coated
Concrete spoon-point screw with high-low thread, anti-slip ribs under head, colour ceramic coatings to C4.
DINHardened steel
Concrete & Masonry Screws
Stainless Bi-Metal Concrete Screw Anchor
SS304/SS316 + SS420 bi-metal screw-in bolt with hex head, metric and inch, for wet and outdoor concrete.
DIN6–14 mm
Concrete & Masonry Screws
Bi-Metal Concrete Screw, Indented Hex Washer Head
SS316 + SS420 concrete screw, indented hex washer head with serrations, ceramic coated 500/1,000 h, 5.5 × 40 mm.
5.5 × 40 mm standardSS316
Concrete & Masonry Screws
Cement Board Screw
Ribbed countersunk Phillips screw with spoon point for fibre-cement board on timber or light steel.
4.2 mmHardened carbon steel
Buying guide
How to specify concrete & masonry screws
Three decisions that prevent most problems on site.
Hole size matters
Drill the hole to the diameter we specify for each screw (for example 5/32" for 3/16" screws, 3/16" for 1/4"). An oversized hole costs most of the pull-out strength.
Embedment depth
Allow at least 25 mm embedment for light fixings and 32–44 mm for structural ones, and keep 2× embedment from free edges.
Corrosion
Blue or silver ceramic coatings suit interior and protected exterior use. For wet or treated concrete use stainless bi-metal screw anchors.
Applications
Projects using concrete & masonry screws
Commercial drywall fit-out on steel studs
Collated and loose screws for partitions and ceilings where speed and consistent countersinking drive the schedule.
Coastal facade and aluminium cladding
A4 stainless and bi-metal fixings for facades within a few kilometres of salt water.
Masonry anchoring for frames and fixtures
Concrete screws that replace plugs and anchors for windows, doors, battens and electrical fixtures.
Concrete & Masonry Screws: common questions
Do concrete screws need an anchor plug?
No. They tap their own thread directly into the masonry hole. Only the drill hole is needed.
Can concrete screws be reused?
They can be removed, but we recommend a new screw for structural re-installation because the thread wears.
What diameters do you supply?
3/16" and 1/4" masonry screws, and 6–14 mm screw anchors, in lengths up to 300 mm.
Request for quotation
Quote for concrete & masonry screws
Tell us the screw, size and quantity. A sales engineer replies within one business day with price, lead time and a sample offer.
- Email[email protected]
- WhatsApp+86 176 2154 1688
- Phone+86 176 2154 1688